Product Overview:
This product is formulated with synthetic base oils, hydrotreated base oils, and corresponding complex additives.
Performance Characteristics:
• Excellent low-temperature starting performance and high-temperature oxidation resistance, providing lubrication protection under various temperature conditions;
• Provides wear protection performance unmatched by any other mineral oil, thus helping to extend engine life;
• Excellent detergency and dispersancy, protecting the engine for lasting cleanliness and powerful performance;
• Excellent fuel economy, correspondingly reducing emissions.
Application Range:
Suitable for various multi-valve, variable valve timing (VVT), direct injection (GDI, FSI and SIDI), turbocharged (TSI, TFSI) and other new technology engines, as well as various luxury cars with extended oil change intervals.
Technical Specifications:
API SN, ILSAC GF-5
| Item | 0W-20 | 0W-30 | 5W-20 | 5W-30 | Test Method |
| Kinematic Viscosity at 100°C (mm²/s) | 8.298 | 9.92 | 8.193 | 10.67 | ASTM D445 |
| Kinematic Viscosity at 40°C (mm²/s) | 43.39 | 52.94 | 47.32 | 64.88 | ASTM D445 |
| Viscosity Index | 170 | 177 | 147 | 155 | ASTM D2270 |
| Flash Point (COC) (°C) | 230 | 230 | 232 | 232 | ASTM D92 |
| Pour Point (°C) | -39 | -42 | -39 | -42 | ASTM D97 |
| Total Base Number (TBN) (mgKOH/g) | 8.71 | 7.49 | 7.23 | 7.44 | ASTM D2896 |
| Low-Temperature Performance Viscosity (mPa.s) | 5165 (at -35°C) | 5741 (at -35°C) | 5015 (at -30°C) | 6145 (at -30°C) | ASTM D5293 |
*The above data is typical and for reference only!
Health and Environment: Avoid skin contact. Wear protective gloves when handling waste oil. If oil gets on your skin, wash it off immediately with soap and water. For disposal of used oil, please take it to designated recycling points. Do not discharge it into sewers, soil, or water.
